Home / Acts & Regulations / Reporting explanations / S.10.01 — Securities lending and repos (Group)

    S.10.01 — Securities lending and repos Group

    View the Solo version of this template →

    EIOPA Taxonomy 2.8.0 Source PDF

    / —
    Loading document…

    Instruction text

    Converted from the official instructions so it can be searched and copied. The PDF above is the document of record.

    S.10.01 — Securities lending and repos

    General comments:

    This section relates to the annual submission of information for groups.

    This template contains an item-by-item list of securities lending transactions and repurchase agreements (buyer and seller) contracts, which also include the liquidity swaps referred to in Article 309 (2)(f) of Delegated Regulation (EU) 2015/35.

    It shall be reported only when the value of the underlying securities on and off-balance sheet involved in lending or repurchase agreements, with maturity date falling after the reporting reference date represent more than 5 % of the total investments as reported in C0010/R0070 and C0010/R0220 of template S.02.01. when method 1 as defined in Article 230 of Directive 2009/138/EC is used exclusively. When method 1 is used in combination with method 2 as defined in Article 233 of Directive 2009/138/EC or method 2 is used exclusively the ratio needs to be adjusted in order to capture the items of all entities included in the scope of template S.06.02.

    All contracts that are on the balance sheet or off-balance sheet shall be reported. The information shall include all contracts in the reporting period regardless of whether they were open or closed at the reporting date. For contracts which are part of a roll-over strategy, where they substantially are the same transaction, only open positions shall be reported.

    A repurchase agreement (repo) is defined as the sale of securities together with an agreement for the seller to buy back the securities at a later date. Securities lending is defined as the lending of securities by one party to another, which requires that the borrower provides the lender with collateral.

    Items shall be reported with positive values unless otherwise stated in the respective instructions.

    The asset categories referred to in this template are the ones defined in Annex IV — Assets Categories of this Regulation and references to CIC codes refer to Annex VI — CIC table of this Regulation.

    Each repo and securities lending contract shall be reported in as many rows as needed to provide the information requested. If for one item one option fits one part of the instrument being reported and a different option fits the other part, then the contract needs to be unbundled unless is stated otherwise in the instructions.

    The template is applicable for method 1 (Accounting consolidation-based method), method 2 (Deduction and aggregation method) and a combination of methods 1 and 2.

    Where method 1 is used exclusively, the reporting shall reflect the consolidated position of the repos and securities lending contracts net of intra-group transactions held within the scope of group supervision. The reporting shall be made as follows:

    • Item ‘Legal name of the undertaking C0010’ and ‘Identification code of the undertaking — C0020’ shall not be reported;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by participating insurance and reinsurance undertakings or insurance holding companies or mixed-financial holding companies shall be reported item by item;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by undertakings consolidated in accordance with Article 335,

    paragraph 1, (a), (b) and (c) of Delegated Regulation (EU) 2015/35 shall be reported item by item;

    – The repurchase agreements and securities lending contracts held by other related undertakings shall not be included.

    Where method 2 is used exclusively, the reporting shall include the detailed list of the repos and securities lending contracts held by the participating undertakings, the insurance holding companies or mixed-financial holding companies and its subsidiaries, regardless of the proportional share used. The reporting shall be made as follows:

    • Item ‘Legal name of the undertaking C0010’ and ‘Identification code of the undertaking — C0020’ shall be reported;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by participating insurance and reinsurance undertakings or insurance holding companies or mixed-financial holding companies shall be reported item by item;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by insurance and reinsurance undertakings, insurance holding companies, ancillary services undertakings and special purpose vehicle which are subsidiaries (European Economic Area, equivalent non-European Economic Area and non-equivalent non-European Economic Area) shall be reported item by item;
    • The repurchase agreements and securities lending contracts held by other related undertakings shall not be included.

    Where a combination of methods 1 and 2 is used, one part of the reporting shall reflect the consolidated position of the repos and securities lending contracts, net of intra-group transactions, held within the scope of group supervision which must be reported and the other part of the reporting shall include the detailed list of the repos and securities lending contracts held by the participating undertakings, the insurance holding companies or mixed-financial holding companies and its subsidiaries, regardless of the proportional share used.

    The first part of the reporting shall be made as follows:

    • Item ‘Legal name of the undertaking C0010’ and ‘Identification code of the undertaking — C0020’ shall not be reported;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by participating insurance and reinsurance undertakings or insurance holding companies or mixed-financial holding companies shall be reported item by item;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by undertakings consolidated in accordance with Article 335, paragraph 1, (a), (b) and (c) of Delegated Regulation (EU) 2015/35 shall be reported item by item;
    • The repurchase agreements and securities lending contracts held by other related undertakings shall not be included.

    The second part of the reporting shall be made as follows:

    – Item ‘Legal name of the undertaking — C0010’ and ‘Identification code of the undertaking — C0020’ shall be reported;

    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis) by participating insurance and reinsurance undertakings or insurance holding companies or mixed-financial holding companies under method 2 shall be reported item by item;
    • The repurchase agreements and securities lending contracts held directly (i.e. not on a look-through basis)by insurance and reinsurance undertakings, insurance holding companies, ancillary services undertakings and special purpose vehicle which are subsidiaries under method 2 (European Economic Area, equivalent non-European Economic Area and non-equivalent non-European Economic Area) shall be reported item by item;
    • The repurchase agreements and securities lending contracts held by other related undertakings under method 2 shall not be included.
    ITEMINSTRUCTIONS
    C0010Legal name of
    the undertaking
    Identify the legal name of the undertaking within the scope of
    group supervision that holds the repo and securities lending.
    This item shall be filled in only when it relates to the repos and
    securities lending contracts held by participating undertakings,
    insurance holding companies or mixed-financial holding
    companies and subsidiaries under deduction and aggregation
    method.
    C0020Identification
    code of the
    undertaking
    Identification code by this order of priority:
    – Legal Entity Identifier (LEI) mandatory if existing;
    – Specific code in case of absence of LEI code.
    Specific code:
    – For EEA regulated undertakings other than insurance
    and reinsurance undertakings within the scope of group
    supervision: identification code used in the local market,
    attributed by the undertaking’s competent supervisory
    authority;
    – For
    non-EEA
    undertakings
    and
    non-regulated
    undertakings within the scope of group supervision,
    identification code will be provided by the group. When
    allocating an identification code to each non-EEA or
    non-regulated undertaking, the group should comply
    with the following format in a consistent manner:
    identification code of the parent undertaking + ISO
    3166–1 alpha–2 code of the country of the undertaking
    + 5 digits
    C0030Type of code of
    the ID of the
    undertaking
    Type of ID Code used for the ‘Identification code of the
    undertaking’ item. One of the options in the following closed
    list shall be used:
    1 — LEI
    2 — Specific code
    C0040PortfolioDistinction between life, non-life, shareholder’s funds, general
    (no split) and ring-fenced funds.
    Underlying assets of life
    technical provisions shall be assigned to life portfolio and
    underlying assets of non-life technical provisions shall be
    assigned to non-life portfolio (by applying the available most
    precise split).
    One of the options in the following closed list shall be used:
    1 — Life2 — Non-life
    3 — Ring fenced funds
    4 — Other internal fund
    5 — Shareholders’ funds
    6 — General
    The split is not mandatory,
    unless otherwise required by the
    national supervisory authority, except for identifying ring
    fenced funds, but shall be reported if the undertaking uses it
    internally. When an undertaking does not apply a split ‘general’
    shall be used.
    For assets held off-balance sheet this item shall not be reported.
    C0050Fund numberApplicable to assets held in ring fenced funds or other internal
    funds, defined according to national markets, in particular
    regarding funds (asset portfolios) supporting life products.
    Number or code which is attributed by the undertaking,
    corresponding to the unique number or code assigned to each
    fund. This number or code has to be consistent over time and
    shall be used to identify the same funds in other templates (e.g.
    in S.06.02). It shall not be re-used for a different fund.
    The Fund Number is not mandatory, unless otherwise required
    by the national supervisory authority.
    C0060Asset categoryIdentify the asset categories of the underlying asset
    lent/provided as part of a securities lending transactions or
    repurchase agreements).
    Use the categories defined in Annex IV — Assets Categories of
    this Regulation.
    C0070Counterparty
    Name
    Name of the counterparty of the contract.
    When available, this item corresponds to the entity name in the
    LEI database. When not available, corresponds to the legal
    name.
    C0080Counterparty
    code
    Identification code of the counterparty using the Legal Entity
    Identifier (LEI) if available.
    If none is available, this item shall not be reported.
    C0090Type of
    counterparty
    code
    Identification of the code used for the ‘Counterparty Code’
    item. One of the options in the following closed list shall be
    used:
    1 — LEI
    9 — None
    C0100Counterparty
    asset category
    Identify the most significant asset category borrowed/received
    as part of a securities lending transactions or repurchase
    agreements.
    Use the asset categories defined in Annex IV — Assets
    Categories of this Regulation.
    C0110Asset held in
    unit-linked and
    index-linked
    contracts
    Identify if the underlying asset identified in C0060 is held by
    unit linked and index linked contracts. One of the options in the
    following closed list shall be used:
    1 — Unit-linked or index-linked
    2 — Neither unit-linked nor index-linked
    C0120Position in the
    contract
    Identify whether the undertaking is a buyer or seller in the repo
    or a lender or borrower in the securities lending. One of the
    options in the following closed list shall be used:
    1 — Buyer in a repo
    2 — Seller in a repo
    3 — Lender in a securities lending
    4 — Borrower in a securities lending
    C0130Near leg amountRepresents the following amounts:
    – Buyer in a repo: amount received at the contract
    inception
    – Seller in a repo: amount ceded at the contract inception
    – Lender in a securities lending: amount received as
    guarantee at the contract inception
    – Borrower in a securities lending: amount or market
    value of the securities received at the contract inception
    C0140Far leg amountThis item is only applicable for repos and represents the
    following amounts:
    – Buyer in a repo: amount ceded at the contract maturity
    – Seller in a repo: amount received at the contract maturity
    C0150Start dateIdentify the ISO 8601 (yyyy-mm-dd) code of the contract start
    date. The contract start date refers to the date when obligations
    under the contract come into effect.
    C0160Maturity dateIdentify the ISO 8601 (yyyy-mm-dd) code of the contract
    closing date. Even if the contract is on an open call basis, there
    is usually a date when the contract expires. In these cases this
    date must be reported, if no call occurs before.
    An agreement is considered closed when it has matured, a call
    occurs or the agreement is cancelled.
    For contracts with no defined maturity date report ‘9999–12 – 31’.
    C0170Solvency II
    Value
    This item is only applicable for contracts that are still open at
    the reporting date.
    Value of the repo or securities lending contract, following
    Article 75 of Directive 2009/138/EC rules for valuation of
    contracts.
    This value can be positive, negative or zero.