Home / Acts & Regulations / Reporting explanations / S.30.01 — Facultative covers for non-life and life business basic data (Solo)

    S.30.01 — Facultative covers for non-life and life business basic data Solo

    EIOPA Taxonomy 2.8.0 Source PDF

    / —
    Loading document…

    Instruction text

    Converted from the official instructions so it can be searched and copied. The PDF above is the document of record.

    S.30.01 — Facultative covers for non-life and life business basic data

    General comments:

    This section relates to annual submission of information for individual entities.

    This template is relevant to insurance and reinsurance undertakings which reinsure and/or retrocede business on a facultative basis.

    It shall be filled by the non-life and life insurance and reinsurance undertakings with information on facultative covers in the next reporting year, covering information on the 20 largest facultative reinsurance exposures (part of sum insured transferred to all reinsurers) overall plus the largest two in each line of business if not covered by the 20 largest. Each facultative risk is submitted to the reinsurer and terms and conditions of the facultative reinsurance are negotiated individually for each policy. Treaties that automatically cover risks are out of scope of this template and must be reported in S.30.03.

    Each underwriting risk shall have a unique code specified by the ‘risk identification code’.

    This template is prospective (to be in line with S.30.03) and as such shall reflect the reinsurance treaties effective and valid during the next reporting year for the overall 20 largest facultative reinsurance exposures plus the largest two in each line of business if not covered by the 20 largest Undertakings shall report the most important risks of the next reporting period which are covered by reinsurance treaties valid during the next reporting period. If reinsurance strategy changes materially after the validity date or if the renovation of the reinsurance contracts are performed later than the reporting date and before next 1 January, the information on this template shall be re-submitted when adequate.

    Facultative placements covering different lines of business shall also appear in the various relevant line of business if they are ranked within the 20 largest facultative reinsurance exposures plus the largest two in each line of business if not covered by the 20 largest biggest risks of the same line of business.

    This template should only be reported if the reinsurance recoverables are higher than 10% of the Best Estimate calculated separately for life and non-life business.

    ITEMINSTRUCTIONS
    Facultative covers non-life
    C0020Reinsurance
    program code
    Undertaking specific reinsurance code that links the
    dominant treaty of reinsurance programme which also
    protects the risk covered by the facultative reinsurance. The
    Reinsurance program code shall be in line with the
    Reinsurance program code of S.30.03 — Outgoing
    Reinsurance Program in the next reporting year.
    C0030Risk
    identification
    code
    For each line of business, as defined in Annex I to Delegated
    Regulation (EU) 2015/35, of non-life insurance a selection
    shall be made of the 20 largest facultative reinsurance
    exposures (part of sum insured transferred to all reinsurers)
    overall plus the largest two in each line of business if not
    covered by the 20 largest that are subject to facultative
    reinsurance in force in the next reporting period (also if they
    originated in preceding years). The code is a unique
    identifying number assigned by the insurer that identifies the
    risk and shall remain unchanged for subsequent annual
    reports.
    This code once assigned shall not be reused for another risk
    even when the risk to which the code was originally assigned
    does not exist anymore.
    When one risk affects more than one line of business the
    same code can be used for all the lines of business affected.
    C0040Facultative
    reinsurance
    placement
    identification
    code
    Each facultative reinsurance placement must be assigned a
    sequence number which is unique for the risk. The
    facultative reinsurance placement identification code is entity
    specific.
    C0041Line of
    business for
    non-life
    Identification of the line of business, as defined in Annex I to
    Delegated Regulation (EU) 2015/35, reported. The following
    closed list shall be used:
    1 — Medical expense insurance
    2 — Income protection insurance
    3 — Workers’ compensation insurance
    4 — Motor vehicle liability insurance
    5 — Other motor insurance
    6 — Marine, aviation and transport insurance
    7 — Fire and other damage to property insurance
    8 — General liability insurance
    9 — Credit and suretyship insurance
    10 — Legal expenses insurance
    11 — Assistance
    12 — Miscellaneous financial loss
    13 — Proportional medical expense reinsurance
    14 — Proportional income protection reinsurance
    15 — Proportional workers’ compensation reinsurance
    16 — Proportional motor vehicle liability reinsurance
    17 — Proportional other motor reinsurance
    18 — Proportional marine, aviation and transport reinsurance
    19 — Proportional fire and other damage to property
    reinsurance
    20 — Proportional general liability reinsurance
    21 — Proportional credit and suretyship reinsurance
    22 — Proportional legal expenses reinsurance
    23 — Proportional assistance reinsurance
    24 — Proportional miscellaneous financial loss reinsurance
    25 — Non-proportional health reinsurance
    26 — Non-proportional casualty reinsurance
    27 — Non-proportional marine, aviation and transport
    reinsurance
    28 — Non-proportional property reinsurance
    C0042Indication of
    belonging to
    the 20 largest
    exposures
    Please indicate whether the exposure belongs to the 20
    largest exposures of the undertaking. The following close list
    shall be used:
    1 – Belongs to 20 largest
    2 – LoB largest not in the 20 largest
    C0050Finite
    reinsurance or
    similar
    arrangements
    Identification
    of the reinsurance contract. The following
    closed list shall be used:
    1 — Non-traditional or Finite RE
    (if any reinsurance contract or financial instrument which is
    not directly based on the principle of indemnity or is based
    on a contract wording which has limited or no demonstrable
    risk transfer mechanism)
    2 — Other than non-traditional or Finite RE
    In case of Finite reinsurance or a similar arrangement only
    the items which are feasible must be filled.
    C0060ProportionalIndicate whether the reinsurance
    program is proportional
    reinsurance, i.e., involves a reinsurer taking a stated percent
    share of each policy that an insurer underwrites. One of the
    options in the following closed list shall be used:
    1 — Proportional reinsurance
    2 — Non-proportional reinsurance
    C0070Identification
    of the
    If the risk relates to a company identify the name of the
    company to whom the risk relates.
    company/perso
    n to which the
    risk relates
    If the risk relates to a natural person, pseudonymise the
    original policy number and report pseudonymised
    information. Pseudonymous data refer to data that cannot be
    attributed to a specific individual without the use of
    additional information, as long as such additional
    information is kept separately. Consistency over time shall
    be insured. It implies that if a single underwriting risk
    appears from one year to another, it shall receive the same
    pseudonymised format.
    C0080Description riskThe description of the risk. Depending on the line of
    business, as defined in Annex I to Delegated Regulation
    (EU) 2015/35, report the type of company, building or
    occupation of the specific risk insured.
    C0090Description risk
    category
    covered
    Description of
    the main scope of the cover of the facultative
    risk. It is normally part of the description used to identify the
    placement.
    The description of the risk category covered is entity specific
    and is not mandatory. Also the term ‘risk category’ is not
    based on
    Directive 2008/138/EC or Delegated Regulation
    (EU) 2015/35/EC terminologies but can be considered as an
    extra possibility the give additional information about the
    underwriting risk(s).
    C0100Validity period
    (start date)
    Identify the ISO 8601 (yyyy-mm-dd) code of the date of
    commencement of the specific cover, i.e., date when the
    cover took effect.
    C0110Validity period
    (expiry date)
    Identify the ISO 8601 (yyyy-mm-dd) code of the final
    expiry date of the specific cover.
    In case the cover conditions remain unchanged when filling
    in the template and the undertaking is not making use of the
    termination clause, the expiry date will be the next possible
    expiry date.
    C0120CurrencyIdentify the ISO 4217 alphabetic code of the currency used
    while placing the facultative cover. All the amounts must be
    expressed in this currency for the specific facultative cover,
    unless otherwise required by the national supervisory
    authority. In case the facultative cover is placed in two
    different currencies, then the main currency must be filled.
    C0130Sum insuredThe highest amount that the insurer can be obliged to pay out
    under the policy. The insured sum relates to the underwriting
    risk. Where the facultative cover provides for a number of
    exposures/risks across the country the aggregate policy limits
    shall be specified. If the risk has been accepted on a co – insurance basis, the insured sum indicates the maximum
    liability of the reporting non-life insurer.
    In the case of unlimited sum insured, the ‘Sum insured’ shall
    be an estimation of the expected possible loss (calculated
    using the same methods as used for the calculation of the
    premium, which shall reflect the actual risk exposure).
    C0140Type of
    underwriting
    model
    Type of underwriting model which is used to estimate the
    exposure of the underwriting risk and the need for
    reinsurance protection. One of the options in the following
    closed list shall be used:
    1 — Sum Insured

    the highest amount that the insurer can be obliged to pay out according to the original policy. SI must also be filled when type of underwriting model is not applicable

    2 — Maximum Possible Loss

    loss which may occur when the most unfavourable circumstances being more or less exceptionally combined, the fire is only stopped by impassable obstacles or lack of substance.

    3 — Probable Maximum Loss

    defined as the estimate of the largest loss from a single fire or peril to be expected, assuming the worst single impairment of primary private fire protection systems but with secondary protection systems or organizations (such as emergency organizations and private and/or public fire department response) functioning as intended. Catastrophic conditions like explosions resulting from massive release of flammable gases, which might involve large areas of the plant, detonation of massive explosives, seismic disturbances, tidal waves or flood, falling aircraft, and arson committed in more than one area are excluded in this estimate. This definition is a hybrid form between Maximum Possible Loss and Estimated Maximum Loss that is generally accepted and frequently used by insurers, reinsurers and reinsurance brokers

    4 — Estimated Maximum Loss

    loss that could reasonably be sustained from the contingencies under consideration, as a result of a single incident considered to be within the realms of probability taking into account all factors likely to increase or lessen the extent of the loss, but excluding such coincidences and catastrophes which may be possible but remain unlikely.

    5 — Other

    other possible underwriting models used. The type of ‘other’ underwriting model applied must be explained in the Regular Supervisory Report

    Although abovementioned definitions are used for the line of business, as defined in Annex I to Delegated Regulation (EU) 2015/35 ‘Fire and other damage to property insurance’, similar definitions might be in place for other lines of business.

    C0150Amount
    underwriting
    model
    Maximum loss amount of the underwriting risk which is the
    result of the underwriting model used.
    C0160Sum reinsured
    on a facultative
    basis, with all
    reinsurers
    The sum reinsured on a facultative basis is part of the sum
    insured which is reinsured on a facultative basis. The amount
    shall be consistent with the Sum insured as specified in
    C0130 and reflects the maximum liability (100 %) for the
    facultative reinsurers.
    C0170Facultative
    reinsurance
    premium ceded
    to all reinsurers
    for 100 % of
    the reinsurance
    placement
    Expected gross annual or written reinsurance premium, gross
    of ceding commissions, ceded to reinsurers for their share.
    Facultative covers life
    C0190Reinsurance
    program code
    Undertaking specific reinsurance code that links the
    dominant treaty of reinsurance programme which also
    protects the risk covered by the facultative reinsurance. The
    Reinsurance program code shall be in line with the
    Reinsurance program code of S.30.03 — Outgoing
    Reinsurance Program in the next reporting year.
    C0200Risk
    identification
    code
    For each line of business, as defined in Annex I to Delegated
    Regulation (EU) 2015/35, of life insurance a selection shall
    be made of the 20 largest facultative reinsurance exposures
    (part of sum insured transferred to all reinsurers) overall plus
    the largest two in each line of business if not covered by the
    20 largest in terms of exposure that are subject to facultative
    reinsurance in force in the reporting period (also if they
    originated in preceding years). The code is a unique
    identifying number assigned by the insurer that identifies the
    risk within the branch, and this code cannot be reused for
    other risks in the same branch and shall remain unchanged
    for subsequent annual reports.
    This code once assigned shall not be reused for another risk
    even when the risk to which the code was originally assigned
    does not exist anymore.
    When one risk affects more than one line of business the
    same code can be used for all the lines of business affected.
    C0210Facultative
    reinsurance
    placement
    identification
    code
    Each facultative reinsurance placement must be assigned a
    sequence number which is unique for the risk. The
    facultative reinsurance placement identification code is entity
    specific.
    C0211Line of
    business for life
    Identification of the line of business, as defined in Annex I to
    Delegated Regulation (EU) 2015/35, reported. The following
    closed list shall be used:
    29 — Health insurance
    30 — Insurance with profit participation
    31 — Index-linked and unit-linked insurance
    32 — Other life insurance
    33 — Annuities stemming from non-life insurance contracts
    and relating to health insurance obligations
    34 — Annuities stemming from non-life insurance contracts
    and relating to insurance obligations other than health
    insurance obligations
    35 — Health reinsurance
    36 — Life reinsurance
    C0212
    C0220
    Indication of
    belonging to
    the 20 largest
    exposures
    Finite
    Please indicate whether the exposure belongs to the 20
    largest exposures of the undertaking. The following close list
    shall be used:
    1 – Belongs to 20 largest
    2 – LoB largest not in the 20 largest
    One of the options in the following closed list shall be used:
    reinsurance or
    similar
    arrangements
    1 — Non-traditional or Finite RE
    (if any reinsurance contract or financial instrument which is
    not directly based on the principle of indemnity or is based
    on a contract wording which has limited or no demonstrable
    risk transfer mechanism)
    2 — Other than non-traditional or Finite RE
    C0230ProportionalIndicate whether the reinsurance program is proportional
    reinsurance, i.e., involves a reinsurer taking a stated percent
    share of each policy that an insurer underwrites. One of the
    options in the following closed list shall be used:
    1 — Proportional reinsurance
    2 — Non-proportional reinsurance
    C0240Identification
    of the
    company/perso
    n to which the
    risk relates
    If the risk relates to a company identify the name of the
    company to whom the risk relates
    If the risk relates to a natural person, pseudonymise the
    original policy number and report pseudonymised
    information. Pseudonymous data refer to data that cannot be
    attributed to a specific individual without the use of
    additional information, as long as such additional
    information is kept separately. Consistency over
    time shall
    be insured. It implies that if a single underwriting risk
    appears from one year to another, it shall receive the same
    pseudonymised format.
    C0250Description risk
    category
    covered
    Description of the main scope of the cover of the facultative
    risk. It is normally part of the description used to identify the
    placement.
    The description of the risk category covered is entity specific
    and is not mandatory. Also the term ‘risk category’ isn’t
    based on Solvency II Directive terminologies but can be
    considered as an extra possibility the give additional
    information about the underwriting risk(s).
    C0260Validity period
    (start date)
    Identify the ISO 8601 (yyyy-mm-dd) code of the date of
    commencement of the specific cover, i.e., date when the
    cover took effect.
    C0270Validity period
    (expiry date)
    Identify the ISO 8601 (yyyy-mm-dd) code of the final
    expiry date of the specific cover.
    C0280CurrencyIdentify the ISO 4217 alphabetic code of the currency used
    while placing the facultative cover. All the amounts of this
    record must be expressed in this currency for the specific
    facultative cover, unless otherwise required by the national
    supervisory authority. In
    case the facultative cover is placed
    in two different currencies, then the main currency must be
    filled.
    C0290Sum InsuredThe amount that the life insurer pays out to the beneficiary.
    If the risk is co-insured with other life insurers, the insured
    capital payable by the reporting life insurer has to be
    reported here.
    C0300Capital at riskThe capital at risk, as defined in Delegated Regulation (EU)
    2015/35/EC.
    If the risk is co-insured with other life insurers, the risk
    capital relating to the life insurer’s amount share in the
    insured capital has to be reported here.
    C0310Sum reinsured
    on a facultative
    basis, with all
    reinsurers
    The sum reinsured on a facultative basis is that part of the
    sum insured which is reinsured on a facultative basis. The
    amount shall be consistent with the Sum insured as specified
    in C0290 and reflects the maximum liability (100 %) for the
    facultative reinsurers.
    C0320Facultative
    reinsurance
    premium ceded
    to all reinsurers
    for 100 % of
    the reinsurance
    placement
    Expected gross annual or written reinsurance premium, gross
    of ceding commissions, ceded to the reinsurers for their
    share.